Nnukwu mpio anwụ anwụ akpaaka fotowelmet egosipụtara

Nnukwu mpio anwụ anwụ akpaaka Photowelding okpu agha

Ngwa ngwaahịa:

A na-eji okpu agha ịgbado ọkụ anyanwụ akpaaka na-agbado ọkụ na ụlọ ọrụ ịgbado ọkụ. Ọ bụ ngwa nchedo onwe onye. kamakwa ngwá ọrụ dị mkpa maka welders. Okpu agha ịgbado ọkụ na-agba ọchịchịrị na-arụ ọrụ dị mkpa karị n'ichekwa welders, kwalite ogo ịgbado ọkụ na arụmọrụ.

Zitere anyị email

Nkọwa ngwaahịa

Ntuziaka ọrụ

Welding Shade Guide Table

Nlekọta

Mkpado ngwaahịa

Nkọwa
Emebere okpu agha ịgbado ọkụ na-agba ọchịchịrị iji chebe anya na ihu gị pụọ na ọkụ, spatter na radieshon na-emerụ ahụ n'okpuru ọnọdụ ịgbado ọkụ nkịtị. Filter na-agba ọchịchịrị na-akpaghị aka na-agbanwe na-akpaghị aka site na steeti doro anya gaa na ọnọdụ gbara ọchịchịrị mgbe akụrụ arc, ọ na-alaghachi na steeti doro anya mgbe ịgbado ọkụ kwụsịrị.

Atụmatụ
♦ Ọkachamara ịgbado ọkụ okpu agha
♦ Klas ngwa anya: 1/1/1/1 ma ọ bụ 1/1/1/2
♦ Nleba anya buru ibu
♦ Welding&egweri& ịcha
♦ Na ụkpụrụ nke CE, ANSI, CSA, AS/NZS

Nkọwa ngwaahịa
ADF9120 EZIOKWU

MODE	TN360-ADF9120
Klas anya	1/1/1/1 ma ọ bụ 1/1/1/2
Ogo nzacha	114 × 133 × 10mm
Lelee nha	98×88mm
Ndo steeti ọkụ	#3
Ndo steeti gbara ọchịchịrị	Ndo dị iche iche DIN5-8/9-13, ntọala mkpịrịka ime
Oge mgbanwe	1/25000S site na Ìhè ruo ọchịchịrị
Oge mgbake akpaaka	0.2 S-1.0S ngwa ngwa ka ọ dị nwayọ, ngbanwe enweghị usoro
Njikwa mmetụta	Ndozi dị ala ruo elu, enweghị nkwụsị
Ihe mmetụta Arc	4
Akara TIG Amps dị ala	AC/DC TIG,> 5 amps
Ọrụ egweri	Ee (#3)
Oke ndo igbutu	Ee (DIN5-8)
ADF Nyocha onwe	Ee
Obere bat	Ee (Red LED)
Nchekwa UV/IR	Ruo DIN16 mgbe niile
Ọnye ike	Mkpụrụ ndụ anyanwụ na batrị lithium a na-agbanwe agbanwe (CR2450)
Gbanyụọ/ gbanyụọ ike	Full akpaka
Ihe onwunwe	Ọkwa mmetụta dị elu, naịlọn
Na-arụ ọrụ okpomọkụ	site na -10 ℃ - + 55 ℃
Na-echekwa okpomọkụ	site na -20 ℃ - + 70 ℃
Akwụkwọ ikike	afọ 2
Ọkọlọtọ	CE EN175 & EN379, ANSI Z87.1, CSA Z94.3
Oke ngwa	Mkpanaka ịgbado ọkụ (SMAW); TIG DC&AC; TIG Pulse DC; TIG Pulse AC; MIG/MAG/CO2; MIG/MAG Pulse; Plasma Arc Cutting (PAC); Plasma Arc Welding (PAW); Na-egweri.

Nke gara aga: Auto Darkening Welding Helmet Welding Masks Steel Material Kwesịrị Ekwesị Maka Ngwá Ọrụ Mwube

Osote: Nnukwu ihe nlele akpaaka na-agbachi agbado okpu agha nwere asambodo CE

1. Tupu ịgbado ọkụ
1.1 Gbaa mbọ hụ na ewepụrụ ihe nkiri nchebe nke ime na mpụga na lenses.
1.2 Lelee na batrị nwere ike zuru oke iji rụọ okpu agha. Katrij nzacha nwere ike ịdịru awa ọrụ 5,000 nke batrị lithium na sel anyanwụ kwadoro. Mgbe ike batrị dị ala, akara ngosi batrị dị ala ga-enwu. Igwefoto katrij nzacha nwere ike ọ gaghị arụ ọrụ nke ọma. Dochie batrị ndị ahụ (lee Ndochi Batrị Na-arụzi).
1.3 Lelee na ihe mmetụta arc dị ọcha yana uzuzu ma ọ bụ irighiri egbochighị ya.
1.4 Lelee maka tightband isi tupu ojiji ọ bụla.
1.5 Nyochaa akụkụ niile na-arụ ọrụ tupu ejiri ya maka akara iyi ma ọ bụ mmebi. A ga-edochi akụkụ ọ bụla a kpụrụ akpụ, gbawara agbawa ma ọ bụ olulu ozugbo tupu ijikwa ọzọ iji zere mmerụ ahụ dị ukwuu nke onwe.
1.6 Họrọ nọmba ndo nke ịchọrọ na nkuku ndo (hụ Tebụl Nduzi ndo). N'ikpeazụ, jide n'aka na nọmba ndo bụ ntọala ziri ezi maka ngwa gị.

hfdgj

Mara:
☆SMAW- Shielded Metal Arc Welding.
☆TIG GTAW-Gas Tungsten Arc (GTAW)(TIG).
☆MIG (Arọ) -MIG na ọla dị arọ.
☆SAM Shielded Semi-Automatic Arc Welding.
☆MIG (Ìhè) -MIG na alloys ọkụ.
☆PAC-Plasma Arc Cutting

1. Nhicha na disinfection: Na-asachapụ ihe nzacha mgbe niile; ejila ngwọta nhicha siri ike. Na-edebe ihe mmetụta na sel anyanwụ na-adị ọcha mgbe niile site na iji anụ ahụ/akwa adịghị ọcha. Ị nwere ike iji mmanya na-egbu egbu na-ehichapụ.
2. Jiri ncha na-anọpụ iche hichaa shei ịgbado ọkụ na eriri isi.
3. Dochie efere nchebe elu na nke ime kwa oge.
4. Ejila oghere n'ime mmiri ma ọ bụ mmiri mmiri ọ bụla ọzọ. Ejila abrasives, ihe mgbaze ma ọ bụ ihe nhicha dabere na mmanụ.
5. Ewepụla ihe nzacha akpaaka na-agba ọchịchịrị na okpu agha. Agbalịla imepe nzacha.

Dee ozi gị ebe a ziga anyị ya